Каталог запасных частей к технике: Lemken Zirkon 10/450
Актуальность каталога: 2010 г.
Модификации: Zirkon 10/450
- Культиватор вертикально-фрезерный Lemken Zirkon 10/450
- Zirkon 10/450
- Zirkon 10/450
- Top link KAT2 M30x3,5 330-450
- Top link pin, cpl. KAT2 D25,4x140
- Top link pin with chain KAT2G D25,4/31,7x158
- Top link pin with chain KAT3G D31,7/25,4x158
- Gear box Zirkon 10/300-450
- Gear box Zirkon 10/300-450
- Side plate extension Zirkon 5x200x384
- Side plate Zirkon 10
- Frame carrier Zirkon 10/450 RE
- Support for levelling bar Zirkon 7+9/400-450-H
- Holder for levelling bar Zirkon 7/9-H
- Holder for levelling bar Zirkon 7/9-H RSW 4.00-4.50
- Pin for levelling bar Zirkon 10-V
- Leveling bar Zirkon 10/450
- Gear bed Zirkon 10/450
- Carrier ZPW+TRW
- Carrier 80x20x666 - RSW
- Adjuster 70x12 21xD17
- Packer roller ZPW D500-4,5m
- Tube bar roller RSW D540-4,5m 2x2,25m
- Trapezering roller
- Trapezering roller TRW D500-450-B-36R
- Packer roller, short scraper ZPW D500-4,5m
- Trapeze packer roller TPW D500-450-36R125
- Trapeze packer roller TPW D500-450-30R150
- Trapeze packer roller TPW D500-450-26R175
- Trapeze disc roller TSW D500-450-36R-125
- Stay Zirkon 7+9/400-450
- Headstock Zirkon 10/300-450
- PTO shaft P500-PG20-710 K64/22R 2200Nm
- PTO guard 1.3/8
- PTO guard Zirkon 9-K
- PTO shaft W2500-SD25-710 K64/2R 200
- Holder for track scraper FSU 70x70-40x20
- Holder for track scraper 70x70 40x20 Zirkon 10 V
- Track scraper
- Track scraper FSU+G25 40x20
- Track scraper FSU P50/6
- Track scraper with holder long FSU-G25 70x70
- Track scraper with holder FSU-G25 70x70
- Track scraper with holder FSU-P50/6
- Lower link connection
- Lower link connection D55/P L2 Z2
- Lower link connection D55/P L2 Z3
- Lower link connection D55/P L3 Z2
- Lower link connection D55/P L3 Z3
- T.p.-linkage, triangular Zirkon 6/7/9
- Fittings FK Solitair/Zirkon 9
- Fittings Zirkon 9-Solitair KA
- Hydraulic
- Hydraulic lift linkage Zirkon 6/7/9-AHG-ST
- Turnbuckle TG-370-M
- Kupplungsteil Zirkon 7+9
- Kupplungsteil ZPW 420 Zirkon 7+9
- Swivel bracket Zirkon/Quarz
- Front headstock FAB-Zirkon 9/9K L2
- Blade tine SW34
- Blade tine SW34P
- Carrier for light LH 14
- Lighting equipment with boards HVR+HVL5m
- Hydraulic assembly SA 80x320-AHG-ST
- Hydraulic assembly SA 90x320-AHG-ST
- Hydraulic assembly DA 80x320-AHG-ST
- Hydraulic assembly DA 90x320-AHG-ST
- Conversion-set lift
- Conversion-set lift linkage AHG-Zirkon 6/7/9
- Conversion-set lift limiter AHG-HB
- Conversion-set HY-DA AHG-FA
- Conversion-set HY-SA AHG-FA
- HY-assembly track marker Zirkon 300
- HY-assembly track marker Zirkon 250-300
- Axle for track marker D30x595 668A
- Swivel bracket